Laboratory rod mill

Advantage characteristics:

　　1. The characteristic take-up, dumping, cleaning and dust-removing devices significantly reduce the labor intensity and dust hazard of the operators.

　　2. The use of low-noise exhaust fan and rubber roller significantly reduces working noise and improves working conditions.

　　3. The rod grinding cylinder adopts the cross-arm micro-elastic locking structure, the locking is firm, the operation is simple, the sample is not leaking, the efficiency is high, the noise is low, especially the crushing effect of the gold in the sample is good, the test result is stable, and the operation requirement is required. Not harsh.

working principle:

　　The form of the broken sample is mainly based on the grinding force. The sample is placed in the sample tube, and can be mixed and self-mixed during the pulverization. The safety factor of the particle size control of the grinding sample is large, and it is not necessary to sieving and mixing one by one after the sample is pulverized. Heavy and dusty operations. The automatic timer only counts the actual grinding time. The time of the middle power failure is not counted. It will automatically stop when it is ground to the specified time. Because it is equipped with a safety protection device that automatically stops the fault over current, no special person is needed next to the machine during grinding. guard.

Technical Parameters:

working principle:

　　The form of the broken sample is mainly based on the grinding force. The sample is placed in the sample tube, and can be mixed and self-mixed during the pulverization. The safety factor of the particle size control of the grinding sample is large, and it is not necessary to sieving and mixing one by one after the sample is pulverized. Heavy and dusty operations. The automatic timer only counts the actual grinding time. The time of the middle power failure is not counted. It will automatically stop when it is ground to the specified time. Because it is equipped with a safety protection device that automatically stops the fault over current, no special person is needed next to the machine during grinding. guard.

Advantage characteristics:

　　1. The characteristic take-up, dumping, cleaning and dust-removing devices significantly reduce the labor intensity and dust hazard of the operators.

　　2. The use of low-noise exhaust fan and rubber roller significantly reduces working noise and improves working conditions.

　　3. The rod grinding cylinder adopts the cross-arm micro-elastic locking structure, the locking is firm, the operation is simple, the sample is not leaking, the efficiency is high, the noise is low, especially the crushing effect of the gold in the sample is good, the test result is stable, and the operation requirement is required. Not harsh.

Technical Parameters:

Technical Parameters:

working principle:

　　The form of the broken sample is mainly based on the grinding force. The sample is placed in the sample tube, and can be mixed and self-mixed during the pulverization. The safety factor of the particle size control of the grinding sample is large, and it is not necessary to sieving and mixing one by one after the sample is pulverized. Heavy and dusty operations. The automatic timer only counts the actual grinding time. The time of the middle power failure is not counted. It will automatically stop when it is ground to the specified time. Because it is equipped with a safety protection device that automatically stops the fault over current, no special person is needed next to the machine during grinding. guard.

Advantage characteristics:

　　1. The characteristic take-up, dumping, cleaning and dust-removing devices significantly reduce the labor intensity and dust hazard of the operators.

　　2. The use of low-noise exhaust fan and rubber roller significantly reduces working noise and improves working conditions.

　　3. The rod grinding cylinder adopts the cross-arm micro-elastic locking structure, the locking is firm, the operation is simple, the sample is not leaking, the efficiency is high, the noise is low, especially the crushing effect of the gold in the sample is good, the test result is stable, and the operation requirement is required. Not harsh.